Philips Unveils 43-Inch 4K Gaming LCD with DisplayHDR 1000, DCI-P3, FreeSync
by Anton Shilov on April 26, 2018 3:30 PM ESTPhilips has announced its new large gaming display that brings together an ultra-high-definition resolution panel, VESA’s DisplayHDR 1000 certification, and AMD’s FreeSync dynamic refresh rate technology. In addition to being the only ultra-large gaming monitor to support the aforementioned features (among those announced to date), the Philips 436M6VBPAB also supports USB Type-C docking, which is going to please users of laptops that feature only USB-C ports.
A Gaming Display with Quantum Dots, Ambiglow, and a Remote
The Philips 436M6VBPAB relies on a 43-inch 8-bit + FRC VA panel featuring a 3840×2160 resolution, 600 – 1000 nits brightness, a high contrast ratio (since it is a VA panel, we are probably talking about something like 2000:1 or better), a 4 ms response time, a 60 Hz optimum refresh rate, 178°/178° viewing angles, and so on. The backlighting is outfitted with a Quantum Dot-enhancement film that enables it to cover an above-average 97.6% of the DCI-P3 color gamut.
In addition to accurate colors and HDR support, the 436M6VBPAB supports Philips' Ambiglow technology, which produces LED lighting effects to match ambient lighting with what is happening on the screen. This is not a programmable RGB lighting found on gaming displays from companies like ASUS, but it adds visual effects that are useful practically and bring additional immersion to games.
Speaking of gaming, it is noteworthy that the ultra-large monitor from Philips takes a page from AOC’s book and supports the so-called Low Input Lag mode that reduces input lag by bypassing “most of the display’s internal processing." This is not particularly surprising since both AOC- and Philips-branded LCDs are made by TPV.
Moving on to connectivity of the 436M6VBPAB. The monitor has four display inputs: 1x DisplayPort 1.2, 1x Mini DisplayPort 1.2, 1x HDMI 2.0, and 1x USB Type-C that can be used both for display connectivity and as an upstream port for a USB 3.0 hub. The LCD supports Picture-in-Picture and Picture-by-Picture capabilities from two sources. As for audio, the display features a 3.5-mm audio input, 3.5-mm audio output as well as two built-in 7-W speakers with the DTS Sound badge.
Another important feature of the Philips 436M6VBPAB monitor is bundled remote controller that can be used to control the monitor as well as other devices connected using HDMI (e.g., media players, game consoles, etc.). The remote is going to be quite handy because the 43-incher can be used like a TV when connected to various media streamers or players (or even a TV tuner!). Now, a disadvantage of this size is that the 436M6VBPAB does not come with a stand that can regulate its height or tilt. To partly solve this, it does have VESA mounts.
FreeSync Meets HDR
The new monitor from Philips belongs to the brand’s Momentum lineup of LCDs aimed at gamers and multimedia enthusiasts. Given the target market, the key features of the Philips 436M6VBPAB besides its dimensions and Quantum Dot-enhanced backlighting are AMD’s FreeSync technology and VESA’s DisplayHDR 1000 badge, a rather odd combination considering the fact that FreeSync 2 is a technology that is supposed to bring HDR to gaming displays. There is an explanation to this combination.
AMD’s FreeSync 2 mandates monitors to support a number of features: they have to support the tech on the logical level (i.e., let games tone map directly to the native color space of a display), they have to cover at least 90% of the DCI-P3 color space, and they have to support a dynamic refresh rate with Low Framerate Compensation. In case of the 436M6VBPAB, the LCD supports a wide color gamut and a dynamic refresh, but not direct tone mapping and LFC, which is why it cannot get an appropriate AMD certification. In fact, it yet has to get a FreeSync certification, which is why Philips uses the term ‘Adaptive Sync for AMD GPUs’. Philips does not disclose dynamic refresh range of the monitor, but given its maximum refresh rate, we don't expect the minimum refresh rate to be much below 45Hz.
Update 6:15 PM ET: Philips Australia has published official specifications of the 436M6VBPAB monitor on its website. The specs list 3840 × 2160 at 60 Hz as "optimum" resolution and refresh rate of the display. At the same time, the LCD supports a 23 - 80 Hz scanning frequency for DisplayPort and HDMI inputs, which looks like the FreeSync range. Considering that 80 Hz is an odd refresh rate, it is highly likely that the monitor overclocks itself from 60 Hz to 80 Hz in certain situations. In the meatime, since display supports a 23 - 80 Hz scanning frequency, it is more than enough for LFC.
Update 4/27: AMD confirmed on Friday that the Philips 436M6VBPAB display is FreeSync certified.
As for the DisplayHDR 1000 logo, the VESA's highest HDR has a rather strict requirements for brightness (600 nits full-screen long duration minimum, 1000 nits full-screen flash minimum) and black levels. The VESA does not mandate local dimming for this standard, yet it does not believe that corner maximum limit of 0.05 nits and tunnel maximum limit of 0.1 nits are achievable without local dimming. That said, while the Philips 436M6VBPAB does not support FALD (full array local dimming), it does support some kind of local dimming and therefore should feature a good contrast ratio.
The Philips Momentum 43" 4K HDR display with Ambiglow | |
436M6VBPAB | |
Panel | 43" MVA |
Native Resolution | 3840 × 2160 |
Maximum Refresh Rate | 60 Hz (normal) 80 Hz (overclocked) |
Response Time | 4 ms GtG |
Brightness | 720 cd/m² (typical) 1000 cd/m² (peak) |
Contrast | 4000:1 |
Backlighting | LED with quantum dots |
Viewing Angles | 178°/178° horizontal/vertical |
Aspect Ratio | 16:9 |
Color Gamut | 100% sRGB/BT.709 97.6% DCI-P3 |
HDR | HDR10 |
DisplayHDR Tier | 1000 |
Dynamic Refresh Rate Tech | AMD FreeSync 23.976 - 80 Hz |
Pixel Pitch | 0.2479 mm² |
Pixel Density | 102 PPI |
Inputs | 1 × DisplayPort 1.2 1 × Mini DisplayPort 1.2 1 × HDMI 2.0 1 × USB Type-C |
Audio | 3.5 mm input/output 2 × 7 W DTS Sound speakers |
USB Hub | 2 × USB 3.0 Type-A connectors 1 × USB 3.0 Type-C input |
VESA Mount | 200 × 200 mm |
MSRP | Europe: €799 UK: £699 US: $799 without VAT (unconfirmed) |
Pricing and Availability
Philips plans to start selling the 436M6VBPAB this May for €799/£699 in Europe. As production of the unit ramps up, its availability will get more widespread in June, but the manufacturer does not explicitly say when it plans to start its sales in the U.S.
Related Reading:
- BenQ Unveils EX3203R 32-inch Curved LCD with FreeSync 2, DCI-P3, & USB-C
- AOC Announces AGON AG322QC4 32-Inch Curved LCD with FreeSync 2 & DisplayHDR 400
- Samsung Announces First Freesync 2 Monitors: CHG70 & CHG90 - Quantum Dots, Up to 49”, 144 Hz, DCI-P3
- AMD Announces FreeSync 2: Easier & Lower Latency HDR Gaming
- Microsoft and AMD to Bring FreeSync 2 Support to Xbox One S and Xbox One X This Spring
- Philips Readies Curved Ultra-Wide 492P8 Display: 49”, 32:9, USB-C, Sub-$1100
- Philips Preps 328P6AU and 328P6VU: 31.5” Professional LCDs with QHD, UHD, HDR, USB-C
- Philips Demos 328P8K: 8K UHD LCD with Webcam, Docking, Coming in 2018
31 Comments
View All Comments
JoeyJoJo123 - Thursday, April 26, 2018 - link
Not the same panel. The one you speak of has a 3000R curvature to it and is 40" as opposed to being the flat 43" panel used in the monitor in this article.https://www.usa.philips.com/c-p/BDM4037UW_27/brill...
JoeyJoJo123 - Thursday, April 26, 2018 - link
I saw this on TFT Central not too long ago, but the direction this is moving toward is really good, and I hope TVs move in a similar direction as this monitor. Also, TFT Central reports contrast ratio as 4000:1, likely aided by the "32-zone edge-lit local dimming is used to support the HDR here". Also a wide color gamut, too.Low Latency
FreeSync
HDR Enabled (High Contrast, Wide Color Gamut)
4K
Relatively decent pricing for what might be a strong contendor for a side TV optimized for gaming consoles. My only hope is that higher refresh rates, wider FreeSync ranges, and FreeSync2 come in future models. It looks really nice as a platform to build on, though.
surt - Friday, April 27, 2018 - link
Not interested in anything less that 120hz.close - Monday, April 30, 2018 - link
@surt: Feels like popping into a store just to tell everybody you're not interested in buying anything. Congrats on the killer rig you use to play games at 4K 120Hz... I for one am not interested in anything under 16K, 480Hz.philehidiot - Friday, April 27, 2018 - link
Curious about the "23.976" min refresh rate for Freesync. There must be something influencing it to make it such a weird number - anyone know?willis936 - Friday, April 27, 2018 - link
It was already the slowest refresh rate in the industry (it’s 23.976 because it’s a 5:4 pulldown from NTSC which is 30Hz/100.1%, how TVs make 24 fps for movies).piroroadkill - Monday, April 30, 2018 - link
That's the standard rate for film as broadcast over NTSC.Magichands8 - Friday, April 27, 2018 - link
Up to 80hz? I'll pass. VA black crush? No thanks. Not interested in anything less than 120hz. There's just no excuse for 60hz anymore.cocochanel - Sunday, April 29, 2018 - link
Attaining 120Hz on 4k resolution from a video card ? How many cards can do that ? The 1080ti can't do that, and it's pretty expensive.I would love to game on a monitor this size. Those ultrawide monitors are kinda weird.
It would be nice as a TV too. Look how simple that remote is. All the features you need and no more. ( you know how a typical 4k TV remote is, 150 useless buttons and features ).
piroroadkill - Monday, April 30, 2018 - link
Yeah, gaming at 4K @ 120Hz. Good luck with that.