The Cherry G80-3494 MX Board Silent Mechanical Keyboard

A first look at the Cherry G80-3494 MX Board Silent reveals an oversized, tall keyboard with a plastic body, with the only thing visually separating it from common 80s keyboards being its black color. It takes a closer inspection by an advanced user to reveal that this is a high quality mechanical keyboard, or an experienced eye to recognize the legendary Cherry G80 design.

We received the US layout version of the Cherry G80-3494 MX Board Silent. It adheres fully to the 104 keys ANSI layout, without any extra keys or modifications. It has a 6.25× Spacebar and seven 1.25× bottom row keys. Cherry is using a classic font on the keycaps, with the letters identical to their first G80 keyboards from the early 90’s but with sharper punctuation marks. There are no extra keys, no keystroke combinations, not any kind of advanced functions.

The Cherry G80-3494 MX Board Silent is a relatively tall keyboard but not too tall, designed for maximum typing comfort. It is just tall enough to allow for comfortable typing without the user’s wrists touching the desk or the keyboard. For long typing sessions though, a proper wrist rest will most likely be a necessity to professionals.


Beneath the keyboard we find only two small tilt adjustment feet. The feet are made of clear plastic. Despite their size, they are surprisingly good at holding the large keyboard firmly in place.

Removing some of the keycaps reveals the new Cherry MX Silent switches. These switches are the new variant of the original Cherry MX linear switches that have been redesigned to limit their noise output, which can be a major problem in some applications. Last year we saw the first commercial keyboards featuring these switches when we reviewed the Corsair Strafe RGB. Our Cherry G80-3494 MX Board Silent sample features the black variant of the switch, which is a little stiffer.

Opening up the plastic body of the Cherry G80-3494 MX Board Silent is very easy, as there are hardly any screws to be found on the keyboard. Almost everything is held together with plastic locks and clips. A small screwdriver or other similar tool is more than enough to undo the clips and crack open the plastic body of the keyboard. Inside the keyboard we found a classic black PCB with the mechanical switches attached to it.

There is nothing advanced on this PCB; there are only the switches and a few passive components, with most of them being classic film resistors. A basic USB controller chip can be found on the small green PCB at the top right side of the keyboard, where the three indicator LEDs are. There is no onboard memory or advanced microcontrollers to be found here, as they would not serve any purpose and counter this keyboard’s intended design, which is based on maximizing its reliability.

As best as anyone at AnandTech can recall, this is the first mechanical keyboard that we have seen to not have a metal frame/support for the switches. Instead it relies entirely on the PCB for mechanical cohesion. It probably is not as resistant against heavy physical blows, yet it should be more than sufficiently sturdy for typical everyday use. What frustrated us is the extensive dead space inside the keyboard’s plastic body, which, in an example of just how far technology has progressed in the last couple of decades, is enough space to fit an entire modern low-power PC. Cherry obviously wanted to keep the keyboard’s frame unchanged as it has been out for decades but, on the other hand, that is a lot of space being wasted there.

Introduction, Packaging & Bundle Per-Key Quality Testing & Hands-On
Comments Locked


View All Comments

  • Gothmoth - Wednesday, September 20, 2017 - link

    make on with illuminated keys (just white no RGB nonsense) and remove the in your face cherry logo.. and i would never ask for another keyboard again.
  • kaidenshi - Friday, September 22, 2017 - link

    Red would be easier on the eyes at night than white. I have a cheap Velocifire mechanical board and its blue-white is almost too much for night typing, which is exactly when it is lit up.
  • SilthDraeth - Friday, September 22, 2017 - link

    Exactly. I have an rgb keyboard on my clevo/sager but I keep it on red, for night vision, and I have a Reddragon mechanical keyboard. Not silent but red led, doesn't hurt eyes at night. Also thevreddragon was $31. And I've had it for a few years. Not to go off topic from the color red. But its a great economical keyboard. Redragon K552 KUMARA LED Backlit Mechanical Gaming Keyboard (Black)
  • Silma - Wednesday, September 27, 2017 - link

    I'd prefer white, especially if the intensity is configurable, which is what I have on my laptop.
    I have a red lit mechanical keyboard, which is ok though.
  • Zingam - Wednesday, September 20, 2017 - link

    How did I update my classic Cherry keyboard? I cut the PS2 cord then disassembled a PS2 to USB adapter. Opened the Keyboard put it in! Voila - a brand new updated Cherry classic keyboard! Now I can use it for another 20 years!
  • HStewart - Wednesday, September 20, 2017 - link

    Interesting, It probably can be done on original IBM PC - but I would hate to alter such a collectors items. But then it just sits.
  • JackNSally - Wednesday, September 20, 2017 - link

    Or use a ps2<->usb adapter?
  • SteelRing - Wednesday, September 20, 2017 - link

    no nubs on J and F, according to a reviewer on amaz0n. that's a deal breaker for a blind typist like me.
  • Inteli - Wednesday, September 20, 2017 - link

    If you look at the pictures, the F and J keys are "deep dish" keys. No nubs, but they have a deeper cut profile, so your fingers sit deeper in those keys than the others.
  • SteelRing - Wednesday, September 20, 2017 - link

    hmm they do look slightly different, i wonder how that feels and whether that would be identifiable easier by blind fingers than the raised nubs.... interesting.

Log in

Don't have an account? Sign up now