One particularly annoying drawback of nearly all powerful electronics is the noise generated from their required coolers. Although PC components are getting more and more efficient, the general rule still holds: a powerful PC will come with significant cooling requirements.

This typically is not a concern for gamers, as the noise generated by the PC is often overshadowed by the speakers or headphones. For users who want to build a high-performance entertainment center, however, noise can be a significant issue. When a PC is installed in the living room, it needs to be powerful enough for games, but still quiet while playing/streaming media. The same goes for users who combine their professional and gaming needs into one system or, for whatever reason, they require abundant processing power to perform their profession.

One of the major noise sources inside a PC is the power supply unit (PSU). Low-cost PSUs tend to be less efficient – losing a larger portion of their input power to waste heat – and as a result they rely on a strong flow of air rather than heatsink surface area alone in order to dissipate heat, which makes them quite loud when power requirements are high. Thankfully, improvements in PSU efficiency have been driving down the amount of waste heat (and thus noise) over the years – at least for the higher-end models. As a result, what we often find is that the higher quality (higher priced) a PSU is, the quieter it operates.

In today’s review, we are having a look at a PSU from SilverStone that puts that rule to the test: the Nightjar NJ700, a 700 Watt ATX PSU that is so efficient and well-designed so as to require no active air cooling at all. Although passively cooled PSU are as rare as hen’s teeth, we have seen several passively cooled PSUs in the past, including our recent review of SilverStone’s own Nightjar NJ450-SXL. The unique aspect of the Nightjar NJ700 is the high power output of 700 Watts, which requires an amazingly efficient design to be able to cope with the thermal losses without any active cooling.

Power specifications ( Rated @ 50 °C )
AC INPUT 100 - 240 VAC, 50 - 60 Hz
RAIL +3.3V +5V +12V +5Vsb -12V
MAX OUTPUT 20A 20A 58A 2.5A 0.3A
100W 696W 12.5W 3.6W

Packaging and Bundle

We received the SilverStone NJ700 in an aesthetically simple but practical cardboard box. The artwork is simplistic, with a blue/gold color theme and based around a picture of the PSU itself. On the other hand, the box is sizable and with very thick exterior walls, providing ample shipping protection.

SilverStone usually goes with the bare minimum number of bundled items, but the NJ700 seems to be an exception. Inside the box, we find the mounting screws, the required AC power cable, a thorough manual, numerous cable ties, and five high-quality black/white cable straps.

The SilverStone Nightjar NJ700 is a fully modular PSU and every cable, including the 24-pin ATX cable, can be detached. With the exception of the 24-pin ATX cable, the rest of the cables are ribbon-like, “flat” type. The main 24-pin ATX cable is made of all-black wires too but they are bundled and held inside a black nylon sleeve.

SilverStone Nightjar NJ700
Connector type Hardwired Modular
ATX 24 Pin - 1
EPS 4+4 Pin - 1
EPS 8 Pin - -
PCI-E 6+2 Pin - 4
PCI-E 8 Pin - -
SATA - 12
Molex - 6
Floppy - 1

The SilverStone Nightjar NJ700 PSU

External Appearance

The SilverStone Nightjar NJ700 definitely is an irregular design, with all surfaces except its bottom perforated to allow for the maximum possible passive airflow. The perforation pattern alone is enough to hint the OEM behind this PSU’s creation to a seasoned expert.


Its chassis is dimensionally close to that of an ATX unit but the NJ700 is 170 mm long, making it a bit longer than what the ATX standard dictates. Still, there should not be any clearance issues with any but the most restrictive of PC cases. Due to its thermal design, however, we would not recommend installing it inside a case with a tight PSU cover because it would essentially block any heat transfer from the unit. The NJ700 is designed so as to be installed with the vents facing upwards, letting the hot air rise and ultimately exit the case via other fans or vents.

In order to leave the heatsinks unobstructed, the designer moved the sticker with the unit’s electrical specifications and certifications to the bottom side of the unit. Even there, the sticker was limited to less than half the surface area, as small vents have been placed under critical components.


At the rear side of the PSU, we find the typical on/off switch and the AC cable receptacle. The interesting thing here is that SilverStone’s engineers placed two mounting hole patterns, allowing the mounting of the PSU to face upwards or downwards. Depending on the case that the PSU will be installed in, the user has to make an educated guess in order to ascertain the optimal orientation for effective passive air cooling. The front side hosts the connectors for the modular cables, all of which are black but are keyed and it is not possible to mix-up the connectors while attaching the cables. A basic legend is sprayed directly on the PSU’s chassis.

Internal Design

With no fan to talk about inside the SilverStone NJ700, we jump right away to the OEM of the platform, who is none other than SeaSonic. As we mentioned above, this is obvious to an experienced PC builder, as the external design of the PSU is, with the exception of the company’s logos, practically identical to that of the SeaSonic Prime Fanless. SilverStone usually employs Enhance for their fanless PSUs but, apparently, Enhance does not yet have a platform that can deliver this high a power output without any active cooling.


As expected from SeaSonic and for the nature of this particular design, the platform that the NJ700 is based upon is pretty much the best it could possibly be without employing cutting-edge digital electronics. That their engineers managed to squeeze 80Plus Titanium efficiency levels out of an analog design is quite a feat on its own. SeaSonic probably sticks with such designs due to their extremely high reliability and proven track record from decades of use.

The insides of the SilverStone Nightjar NJ700 do not look much different than any other high quality 700W PSU. Even the heatsinks, though sizable, are not as substantial as one would expect from a passively cooled unit. Only the heatsink placed directly on the main transformer stands out compared to typical ATX products.

A generous filtering stage begins at the back of the AC receptacle, under a shield, with six Y capacitors, three X capacitors, and two filtering coils. There are two powerful rectifying bridges, with a sizable heatsink sandwiched in between them. There are two APFC capacitors, both made by Nippon Chemi-Con and rated at 400v/470μF each.

The primary side of the PSU is a standard full-bridge configuration with an LLC resonant converter. On the secondary side, four MOSFETs generate a single 12V line, with additional DC-DC converters present to generate the 5V and 3.3V lines from that. The difference is that both the four inverting transistors on the primary side and the four converting MOSFETs on the secondary side are top-tier products with extremely low drain-source resistance and gate charge, making them remarkably efficient.

Most of the secondary capacitors in the SilverStone NJ700 are polymer products made by FPCAP. A lot of them are placed on the secondary PCB that holds the connectors for the power cables for the final filtering of the DC power lines. Nevertheless, there are a few electrolytic capacitors present, one made by Rubycon and the rest by Nippon Chemi-Con, making the Nightjar NJ700 an all-Japanese affair.

Cold Test Results (~22°C Ambient)
Comments Locked


View All Comments

  • coolkwc - Wednesday, December 8, 2021 - link

    Passive PSU is just pointless. A 12cm fan with 800rpm is easy enough to let the unit stay much cooler without any noise.
  • Oxford Guy - Thursday, December 9, 2021 - link

    Until it clogs with dust. Cleaning a PSU is a pain, especially with a complex water loop.
  • mindless1 - Monday, January 17, 2022 - link

    You have this backwards, in most cases. In order to not draw in dust through the passively cooled PSU, the case must have positive pressurization, placing more audible (per same amount of noise) intake fans forward (and on top) in the case, assuming typical rear-out airflow pattern.

    If someone cares about dust, they minimize its entry into the case instead, using filter media. You could strap a filter onto the PSU too, but this is someone already committed to using filters so would certainly filter other intake areas as well, so there would be minimum dust getting into the PC to enter the PSU, in the situation of a fan cooled PSU.

    Further, not having to rely on the case intake fans to passively cool the PSU, means they can run at lower RPM so these more audible fans (per amount of noise created) are creating less noise.

    I don't even understand your post. If cleaning is so complex because you didn't design with cleaning in mind, then why on earth would you go with a passive PSU, which is all the more subject to needing minimum dust for good cooling, instead of using appropriate case filtration? Seems like multiple design mistakes in a row if you are placing priority on system longevity, but I concede some will just chase the ghost of quiet, so they can make their own noise instead from other things, which is kind of strange that the user can be the only entity making noise but whatever.
  • Lucky Stripes 99 - Saturday, December 11, 2021 - link

    In an otherwise silent room, you'd be amazed at what you can hear. After building a silent PC, I started picking up on some barely audible whine from my monitor. Never noticed it before, even with very quiet PCs prior.
  • Oxford Guy - Saturday, December 25, 2021 - link

    Some people live in noisy cities, in buildings that aren’t great at blocking noise. Research has also found that regular long-term subway commuting (i.e. NYC) causes serious hearing damage. That many claim things are quieter than they are can be partially explained by differences in the state of their hearing and the ambient level beyond what the equipment produces.
  • Wrs - Sunday, December 26, 2021 - link

    Certainly possible, but ambient noise levels in a home environment are unlikely to be related to hearing damage. (I've been in thousands of homes. The vacuum and blender and occasional kid's scream are probably the loudest things but those aren't chronic.) It's more that comparable electronic parts can make orders of magnitude more or less perceptual noise. This goes for both fans and coil whine because of differing human sensitivity toward different frequencies. We're about 1000x more sensitive to 3000 Hz than to 200 Hz. Pretty much when you see hearing damage around 3000 Hz it's listening to loud music or long-term exposure to city traffic or a loud workplace. Then there's of course wax buildup - the removal of which increases sensitivity and lowers the threshold for hearing damage.

    So yeah, fanless PSUs can be way louder than fanned ones if they're not hardened against coil whine. But unless you're using server fans no computer component ought to be in the same sentence as hearing damage.
  • Oxford Guy - Monday, December 27, 2021 - link

    Why is hearing damage the point here? The main point is being able to enjoy one's environment. Noise pollution impedes that.

    Also, people with tinnitus can find that sound levels well below damaging can aggravate tinnitus. I am very sensitive to computing equipment. Enough exposure to a gaming machine and hiss tinnitus transforms into a warble that's extremely problematic when it comes to getting a decent night's sleep. Therefore, the damage from aggravated hearing can come from lack of high-quality sleep and the stress of irritating phantom noise.
  • Wrs - Tuesday, December 28, 2021 - link

    @Oxford Guy because you keep bringing up hearing damage, from subways or headphones. I do not know what subways have to do with computing equipment, but I do understand if computing equipment is loud enough, then using open headphones to drown them out can lead to hearing damage. I'm just saying most modern fanned consumer PSUs are magnitudes away from loud enough to cause that. I'll of course make exception for defective, or poorly designed, or server PSUs.

    Hey, I appreciate you bringing up concerns of those suffering significant tinnitus, which I can't comment on as have no experience or training. But let's not blanket project those concerns to buying advice for all users, as around 95% don't have it (depends on how severe the cutoff).

    And then with this clogs-with-dust comment -- do you have something personal against PSU fans? As I understand the radiator in an open loop is far denser and thus clogs with dust much sooner than tower fins or a PSU fan which is essentially a downdraft cooler with an intake grille, one of the easier things to clean in a modern case as you can just vacuum the intake from the exterior.
  • mindless1 - Monday, January 17, 2022 - link

    Apparently potential buyers can't enjoy their environment and are always chasing the ghost of zero noise. I enjoy my environment equally well from the very subtle sound of air from low RPM fans. If I were engaged in an activity that produces a lot of heat like gaming, then my focus would be on the game, certainly not distracted by low RPM fans, but if I were distracted it would be from the more powerful intake fans needed to keep a passive PSU cool enough.
  • Lucky Stripes 99 - Saturday, December 11, 2021 - link

    I'd love to see highly efficient quiet power supplies like this in the flex ATX form factor. I replaced the stock PSU in my mini ITX case with a fanless 12V DC-DC PSU fed by a 216W laptop brick. It is silent, but it took some soldering and drilling to make everything work.

Log in

Don't have an account? Sign up now