In and Around the Nanoxia Deep Silence 2

As I mentioned before, apart from the top of the enclosure and the now blocked off fan fascia in the front of the case, the Nanoxia Deep Silence 2 is very much a dead ringer for the Deep Silence 1. Interestingly, Nanoxia opted to send me the white model of the DS2. As with the DS1, the DS2 comes in four color combinations: black panels on a black shell, silver panels on a black shell, gunmetal (they call it anthracite) panels on a black shell, and white panels on a white shell. My favorite continues to be the gunmetal finish, but the white isn't bad looking at all.

Losing the fan door in the front of the DS2 means losing the filters for the intake fans, which is an unfortunate loss. The front filters on my DS1 tend to get gunked up in a hurry (the joys of being a cat owner), so take note. That said, the door to the optical drive bays is basically the same in terms of build quality and acoustic padding, and it also hides the sliders for the fan controller as well as the reset button.

The top of the DS2 is where the differences are most noticeable, as the chimney is gone in favor of just a pair of fan mounts and a cluster of I/O surrounding the green LED-ringed power button. Once again I'm perplexed as to why an odd number of USB ports are included, though: you get two USB 3.0 ports, but why only one USB 2.0? It's a fairly minor grievance but enough of one; with how smart and quality-oriented the rest of the DS2's design is, why would they cheap out here?

Unfortunately my largest complaint with the DS1 remains unaddressed with the DS2. The side panels are held in place by thumbscrews, but they again use the notches and rails instead of a hinged design to secure themselves. The hooks on the side panels are very easy to bend inward if you try to force them back on. This is in fact the single biggest usability issue the DS2 has, but it's a frustrating one, requiring you to turn the case on its side and use your body to apply enough pressure to evenly replace the panel.

The interior of the DS2 is fairly by the book, but the biggest loss is the set of removable drive cages. In its place we have a pair of internal 120mm fan mounts that Nanoxia even recommends using for a 240mm radiator, and Nanoxia continues to include a smart set of cable routing holes in the motherboard tray as well as toolless clamps on both sides of the 5.25" drive cage. In fact, in the DS2 Nanoxia actually does one better than the DS1, as there's a proper rubber-lined routing hole above the motherboard tray for the AUX 12V line.

I remain fairly optimistic about the design of the DS2, but I do feel like the pair of internal fan mounts are of questionable value compared to being able to outright remove drive cages that aren't needed. Removing those cages is a good way to improve air flow in systems that don't need that much storage. I'm still pretty bitter about the notched side panels as well, but despite these minor grievances, I'm left with a very strong feeling of quality from the DS2. This is a heavy, robust case.

Introducing the Nanoxia Deep Silence 2 Assembling the Nanoxia Deep Silence 2
Comments Locked


View All Comments

  • Blibbax - Thursday, February 14, 2013 - link

    The lack of intake filters is an absolute dealbreaker for me. You get front filters on cases that cost £30.
  • Hrel - Thursday, February 14, 2013 - link

    Agreed, really sad to see something that costs, for all intents and purposes, nothing be excluded. Hell, take away the bottom one. That's where the PSU goes, why would anyone even put fans there? So close, SO SO close. Happily I'm not building a new desktop until late summer to fall this year. Hopefully my ideal case has been released by someone by then.

    Haha, probably not though.
  • kenyee - Thursday, February 14, 2013 - link

    Seems to be roughly in the same size/cost/performance class IMHO....
  • Dustin Sklavos - Friday, February 15, 2013 - link

    No comparison with the R4 in this review because the R4 consistently performs worse than the DS1. The DS1 is a superior enclosure to the R4, and the DS2 performs roughly on par with the DS1.
  • Hrel - Thursday, February 14, 2013 - link

    You REALLY need to do something about your noise floor. 30db is crazy loud. Makes you sound testing only partially usable. Go to a basement with no other equipment. Go to a bedroom. Do SOMETHING to get that noise floor down to more realistic levels.
  • Zoatebix - Thursday, February 14, 2013 - link

    I'm pretty sure that's a product of the sensitivity of his equipment, not a noisy testing environment.
  • Dustin Sklavos - Friday, February 15, 2013 - link

    Correct. 30dB is the noise floor of the majority of sound meters. If you want a sound meter that goes below that, you're looking at spending at least a grand if not two.
  • Hrel - Monday, February 18, 2013 - link

    I see, perhaps the Anand Writers could pool their resourced to make it happen? Hm, yes yes! Probably wishful thinking but I'm gonna keep wishing.
  • Dug - Thursday, February 14, 2013 - link

    30db is not crazy loud. It is a whisper.
    Mine measure 30db at seating position and I can't hear it with normal house ambient noise.
    Even in the dead of night its barely noticeable. Typing and clicking the mouse is far louder than my computer. If you aren't typing or using your mouse, then what good is the computer?
  • Dug - Thursday, February 14, 2013 - link

    Not to mention it rains here a lot. Rain on house is 50db so the computer doesn't even come into the equation.

Log in

Don't have an account? Sign up now