Fractal Design Define XL R2 Case Review: Maybe We Can Have It All?

Introducing the Fractal Design Define XL R2

Amusingly and appropriately enough, the wave of silence-oriented enclosures that have been popping up recently haven't really drawn attention to themselves as a trend. Yet all of a sudden, we have results from a couple of solid contenders from Nanoxia and a few less expensive (and more readily available) also-rans. For a little while, this was a wave that Fractal Design was riding high, but the Define R4 wound up being a little underwhelming. As it turns out, they might just have something better lying in wait.

We never had a chance to play with the original Fractal Design Define XL, so it's tough to draw a direct comparison there. Yet one look at Fractal Design's page for the original tells you that while the Define R4 didn't change much from the R3, the Define XL R2 is a major shift. The original XL didn't support E-ATX; it was more just a conventional Define with a separate drive compartment. This R2, on the other hand, really is a giant Define R4. As it turns out, that bump in size and modest increase in cooling capacity may very well have been all the Define R4 needed.

There are two dead horses I need to bludgeon before we progress any further with this review. First, the quiet chassis to beat are the Deep Silence 1 and 2 from Nanoxia; availability notwithstanding, those two offer the best value and best balance of performance and acoustics. In the XL R2's price bracket, the Deep Silence 1 is basically the bar. Keep in mind, though, that the DS1 is a smaller case than the XL R2, so if you need the extra space, Fractal Design may just win by default.

The other thing to keep in mind is that designing a quiet chassis is basically one of the hardest things a vendor can do. What you're essentially trying to do is get the system inside the case to a noise level low enough that the sound dampening material can do the rest of the job. High end enthusiast cases tend to be very quiet because of their copious high power, low noise airflow. What we want is a case that can get below that already low noise floor. The problem is that doing so means closing off a lot of ventilation; capturing sound means capturing air, and reduced airflow means reduced thermal performance.

Consider that the two Deep Silence cases are already pretty heavy and well built in their own right, then add another ten pounds and three inches. The Define XL R2 is made almost entirely of steel with really the bare minimum of plastic used in its construction, and you definitely feel it. This is a big case, but Fractal Design was able to hit a very aggressive price point with it. The last generation Define XL cost a full $40 more.