ASUS Unveils TUF Gaming B760M-BTF WIFI D4 Motherboard: Reverse Mounted Connectivityby Gavin Bonshor on March 14, 2023 2:15 PM EST
When done correctly and with patience, cable management can be a rewarding experience; for the most part, it's frustrating, especially for premium systems. Much of the onus has been on chassis manufacturers to utilize the space offered to provide ample room for cable management. ASUS looks to go the other way and has announced a motherboard with the primary power connectors and headers on the rear, the TUF Gaming B760M-BTF WIFI D4. Like MSI's Project Zero and GIGABYTE's Project Stealth, ASUS calls its new series Back to 'the' Future, or BTF for short, to distinguish them from the rest of its alphabet spaghetti-named line-ups.
More on the value-oriented side of the fence than their more premium models, ASUS has taken one of its pre-existing motherboards (TUF Gaming B760M-PLUS WIFI) and engineered it so that the power headers and primary connectors such as SATA, fan headers, and front panel USB headers are placed on the rear. Based on the B760 chipset for Intel's 12th Gen and 11th Gen Core series processors, the ASUS TUF Gaming B760M-BTF is a micro-ATX offering and represents ASUS's TUF Gaming series. As it's representative of an entry-level model, ASUS has opted for DDR4 support, as Intel's Alder Lake (11th Gen) and Raptor Lake (12th Gen) both support DDR5 and DDR4.
Touching on the core details, the front of the ASUS TUF Gaming B760M-BTF WIFI D4 looks like any typical motherboard sans the connectors on the rear. It has a black PCB with grey highlights and packs an entry-level to mid-range feature set. ASUS includes four memory slots with support for up to DDR4-5333 with a maximum capacity of 128 GB. As a WIFI model, it comes with a WIFI 6 wireless interface, an unspecified Realtek 2.5 GbE controller, and an unspecified HD audio codec. Still, ASUS hasn't provided specifics on these as of yet. ASUS also includes two M.2 connectors on the front with heatsinks, which can support PCIe 4.0 x4 M.2 drives.
Looking at the rear of the board, this is where all of ASUS's new Back to the Future implementations come into play. All relevant connectors are in the same places as they would be on the front, but they have just been reverse-engineered to protrude out the rear of the case. This includes the 24-pin ATX motherboard, one 8-pin 12 V, and one 4-pin 12 V CPU power input, four SATA ports, front panel USB headers, and eight 4-pin fan headers. There is also a single PCIe 4.0 x4 M.2 slot on the rear, although this doesn't come with a heatsink, so if an NVMe drive is going to be used, it'll likely require a low-profile aftermarket heatsink.
ASUS does include support for USB 3.2 G2x2 on the rear panel through one port, with an additional two USB 3.2 G2 ports (1 x TypeA and C), with two USB 3.2 G1 Type-A and one USB 3.2 G1 Type-C; this means the rear panel has three USB Type-C ports. ASUS also includes four USB 2.0 ports, one DisplayPort, one HDMI output, three 3.5 mm audio outputs, and a clear CMOS button.
Despite the apparent benefits of reducing cable clutter in the main compartment of a system's chassis, an existing chassis will likely need some form of modification to realize its potential fully. This is apparent as the 24-pin motherboard and 12 V CPU power inputs come out of the board and are not at a right angle as we've seen on some boards from other vendors. There is also the likelihood that a new chassis built around this concept will come to market in the coming months. Maybe ASUS has jumped into a DeLorean, time-warped into the future, saw what chassis designs are coming to market, and decided to jump the gun; who knows?
At the time of writing, ASUS hasn't indicated the board's pricing or when the TUF Gaming B760M-BTF WIFI D4 is expected to hit retail shelves. ASUS also hasn't announced whether or not its Back to The Future (BTF) rear-mounted connector design will be featured in other model lines as we go further into 2023.
Post Your CommentPlease log in or sign up to comment.
View All Comments
meacupla - Tuesday, March 14, 2023 - linkGiving new meaning to "reverse-engineered", I guess. Reply
kpb321 - Tuesday, March 14, 2023 - linkThis seems like a case compatibility nightmare. The average motherboard tray is going to block most if not all of the ports and even if you modify the tray to cut/drill holes/slots for the connectors you may not have much clearance on that side of the case meaning you might need right angle connectors to use the ports.
This feels like something they may have done for a boutique vendor that already has a case planned around it and they just decided to sell it retail too for anyone who was interested. It would give a very clean look for a window case having the cables on the back side of the board. Reply
Samus - Wednesday, March 15, 2023 - linkYeah, you will definitely have to hack up any mounting tray, even one that is mostly open, especially since the connectors are so close to standoffs where there will be supports on the tray.
But I guess no matter how back of a hackjob it is, it won't show since its on the back. Overall a cool concept. Based on the B-series chipset choice I'm guessing this is targeting OEMs, particularly Asus own prebuilds. Reply
Hul8 - Wednesday, March 15, 2023 - linkIt's a new initiative that will require a new case that is "DIY-APE" compatible.
Depending on whether this takes off either you'll be strapped for case choices, or most new case designs will start accommodating these boards (in addition to the standard ATX keepout areas). Reply
Duwelon - Tuesday, March 14, 2023 - linkThis is awesome, this should be the standard in the near future for all motherboards and cases. Reply
philski - Wednesday, March 15, 2023 - linkYou can see images of an upcoming ASUS chassis with tray cutouts here https://www.club386.com/msi-b650-diy-ape-motherboa... Clean. Will it catch on? I guess we'll see... Reply
meacupla - Wednesday, March 15, 2023 - linkohhh, that's nice. I see MSI and ASUS sharing some standardization with where to place the connectors.
I especially like that they have both decided to go with mATX.
If this is not too expensive, I hope this catches on. Reply
Igor_Kavinski - Wednesday, March 15, 2023 - linkThe power connector need to change too. Shouldn't require a lot of force to plug them in. This goes for all power connectors including the PCIe ones. They need to be as easy as inserting a USB device and an audible click to know it's secure. Reply
sheh - Wednesday, March 15, 2023 - linkTook me a while to realize where the connectors are.
I wouldn't call it "rear" (= near the back panel or PCIe slots). It's "bottom". Reply
Dug - Wednesday, March 15, 2023 - linkNew power plugs need to be redesigned. They are unnecessarily large. And placement of 24pin and 8pin should be shortened to be close together. Reply