Assembling the BitFenix Prodigy

Putting together a mini-ITX system is almost never easy, necessarily, but the BitFenix Prodigy seems to be designed to simplify the process as much as possible. Part of that is because the Prodigy is admittedly a bit larger than I'm used to seeing mini-ITX cases be, but not by much. Most of it has to do with a smart, modular design.

Being able to easily remove both the top vent and the main drive cage without having to remove any screws made it very easy to get started. The I/O shield for the testbed motherboard fit in snugly, and then the motherboard itself was surprisingly easy to mount into place. Ordinarily with a smaller build like this one I'd connect modular power cables to the motherboard and components first and then slot in the power supply, and it was at this juncture that I first encountered arguably the biggest problem with the Prodigy: power supply clearance.

Our testbed power supply is 160mm, but the modular connectors make it impossible to actually fit inside the power supply bay, and I suspect even a non-modular 160mm PSU would be a tight fit at best. As a result I wound up re-using the SFX power supply from the SilverStone FT03 Mini with an adapter plate, and the much smaller power supply made cabling worlds easier. I feel like if anything about the Prodigy is going to hang up end users, this will be it, so buyer beware: if you're planning a build in this case, get a 140mm power supply. Honestly even going the route I did and using an SFX power supply with an adaptor wouldn't be a bad idea.

For the drives, I wound up installing the 2.5" SSD in one of the bays built into the right side panel and the 3.5" Corsair Link in one of the trays in the bottom cage. Installing the optical drive involves removing the front panel (easy enough to do), twisting out the bay cover from the chassis, and then popping the shield out of the panel. From there, BitFenix includes thumbscrews for securing the 5.25" drive in place. I'd gripe about a lack of toolless installation here, but realistically this is a $79 case with an awful lot to offer. I'll take the hit, plus I don't know many mini-ITX builds that get opened up and tinkered with on a regular basis once they're in service.

Installing expansion cards is a little more fraught, though. Due to the height of the case, I couldn't use my comparatively short power screwdriver to loosen the thumbscrews in the expansion slots. You also have to loosen the screw above the slots, which locks a plate into place. It's involved to be sure, but could've been made a lot easier if the screw above the slots wasn't almost perfectly lined up with the screw for the second expansion slot. These are thumbscrews and they mean it; you're not fitting a screwdriver in there. This is something I think BitFenix could probably fix on the next iteration by moving that top screw between the two expansion slot screws. Still, I was able to swap graphics cards in and out of the Prodigy for testing without too much trouble.

Finally getting everything wired up wound up being a little more difficult, but that was due almost entirely to the drive and I/O being mounted to the right side panel. BitFenix made what allowances they could for routing cabling, but in a case this small you're still fundamentally going to have to just squeeze things in here and there. While I ran into a couple of hiccups putting the Prodigy together, ultimately it was still far easier than Mini-ITX cases typically are.

In and Around the BitFenix Prodigy Testing Methodology


View All Comments

  • Saketai - Friday, June 1, 2012 - link

    Very interesting times in the Mini-ITX world.

    Now if only these were on Newegg...
  • Dustin Sklavos - Friday, June 1, 2012 - link

    The best place to get BitFenix cases in the states right now is NewEgg, for some reason, just refuses to carry BitFenix stuff. Reply
  • crimson117 - Friday, June 1, 2012 - link

    Probably can't agree on volume / pricing details. Reply
  • Taft12 - Friday, June 1, 2012 - link

    When your stuff's not on Newegg, there *IS* no volume. Pressure from customers on both parties will get the deal done though.

    NCIXUS is a fine alternative in the meantime (a fine alternative all the time, actually). Does Tiger Direct carry Bitfenix?
  • crimson117 - Tuesday, June 12, 2012 - link

    It's there now, fwiw: Reply
  • Matt355 - Friday, June 1, 2012 - link

    Wow. That store slipped under the radar. I've been buying parts for years and had never heard of it. Reply
  • VoraciousGorak - Friday, June 1, 2012 - link

    I'll probably be corrected here in a moment, but I *think* they were Canada only for a long time, only recently opening a United States-servicing website. They are definitely worth a look, I've bought a few things from there. Reply
  • randinspace - Saturday, June 2, 2012 - link

    There's one issue with shopping from that's either a minor curiosity or an extreme annoyance depending on your perspective and/or situation: because they're a Canadian company doing business in America (even shipping out of California...) they SOMEHOW raise red flags with certain bank/credit card companies' anti-fraud units when you buy from them using a credit card. NCIX (hilariously) informs you of this snafu during the order process/on their site so I wasn't blindsided, and I think they take paypal which would presumably be a solution, but there's nothing like wrangling with the completely automated anti-fraud process of your bank at 10 in the morning when you're trying to get something else done.

    On the bright side they purport to be working on a solution to that issue (getting a US bank account? Having enough people tell their banks that they actually placed an order with them?), and from time to time they have sales on things people actually want (as opposed to Rosewill adaptor kits, items with MIRs that will never be fulfilled, and refurbished <320GB HDDs) that put Newegg to shame.
  • Guspaz - Saturday, June 2, 2012 - link

    They're one of if not the biggest online computer stores in Canada (been around since 1996). There are a bunch of sister companies that operate separate stores like DIrectCanada, BestDirect, etc.

    I can't speak to their US service, but they're not a small fly-by-night. They're basically the Canadian equivalent of NewEgg (other than NewEgg Canada, obviously).
  • anactoraaron - Friday, June 1, 2012 - link

    In Newegg's defense, they are really trying to sell watches and power tools... wtf happened to the 'egg anyway?? Reply

Log in

Don't have an account? Sign up now