Cooler Master V1200 Platinum Power Supply Reviewby E. Fylladitakis on November 21, 2014 2:00 PM EST
- Posted in
- Cooler Master
Hot Test Results
As shown in the following tables, the Cooler Master V1200 Platinum offers excellent power output quality. Our instrumentation recorded a maximum ripple of 38mV on the 12V line under maximum load, which is no small feat for a line supplying over 85 Amperes. The severe cross-loading of the voltage lines has little effect on the output stability, and it hardly affects the voltage lines any different than a very heavy balanced load. It also displays excellent voltage regulation, at 0.75%, 0.8% and 1.0% for the 3.3V, 5V and 12V line respectively.
|Load (Watts)||242.22 W||604.62 W||903.35 W||1199.57 W|
(20% to 100% load)
|Voltage Ripple (mV)|
|20% Load||50% Load||75% Load||100% Load||CL1
3.3V + 5V
High ambient temperatures have little impact on the performance of the Cooler Master V1200 Platinum, even smaller than that of the almost identical SS-1200XP3. The average nominal load (20-100%) efficiency drops to 93.0% and the maximum efficiency is 94.1% at 50% load. Technically, this unit would maintain its 80 Plus Platinum certification even if the test took place with an ambient temperature of >45°C. (Note that the 80 Plus certification tests take place with an ambient temperature of 25°C.)
As expected, the cooling system maintains a similar profile with the PSU inside the hot box -- the higher ambient temperatures just make it even more aggressive. The fan once again starts at 20% load, but the speed of the fan is now rapidly increasing as soon as the load increases any further. Even at 50% load, our instrumentation was reading over 44dB(A), a sound pressure level that would surely be rated as uncomfortable by the vast majority of consumers. If the load is over 800 Watts for prolonged periods of time, the sound pressure level goes over 50dB(A), creating a hostile environment for any typical consumer/commercial users.
Post Your CommentPlease log in or sign up to comment.
View All Comments
Essence_of_War - Friday, November 21, 2014 - linkGood gracious, that is a LOUD fan!
Luscious - Friday, November 21, 2014 - linkYour sound measurements are off.
I have this power supply, and at 1200 watts it is quiet.
JarredWalton - Friday, November 21, 2014 - linkWhat SPL meter did you use, what are the test conditions, what is the precise output load (in watts), and how far from the PSU are you measuring noise? My guess is: you don't have an SPL meter, your PSU is in a closed up case, the load is probably more like 700-900W at most, and you're sitting a few feet away. Remember, input power is not output power, and generating a load of 1200W would require basically four R9 290X GPUs running at max power with a bit of overclocking added in for good measure. There aren't many ways regular PC users would ever have a constant load anywhere near 1200W, and at 800W (which is still a lot for a PC) the noise is quite a bit lower.
bebimbap - Friday, November 21, 2014 - linkI love these power supply reviews, esp the value statements in the conclusion. That is exactly how I would think.
I especially appreciate the hot tests. They are tests a reasonable consumer could not easily perform at home.
Luscious - Saturday, November 22, 2014 - linkI admire your attempt to uphold your article's credibility, but did you think for a minute that perhaps you received a flawed unit, or compare your results with those of other credible reviews already out prior to publishing your findings?
Going into detail here regarding my setup would require a page and a half, however I will say that I was running four 780's pushing near 1200MHz and an overclocked 5960X at 1.25 volts. And that doesn't include the ~100 watts needed by the dozen Bitfenix PWM fans on the rads used to cool all of this. No, this was not in a closed case, the load being pulled from the wall was between 1150 and 1290 watts depending on the job being run, and I was not sitting "a few feet" away as you think I might have been.
In the three reviews listed here, neither mentions this power supply being as loud as your review suggests:
Galidou - Sunday, November 23, 2014 - linkWhat kind of an answer is that man, giving links that doesn't even match the message you're sending to the anandtech reviewer?
Overclock 3D isn't a full review all he says is that it's quiet, no ambient room temperature no noise mesurement device based on his opinion only. One page review where half of the time on the video speaks about the ripple suppression and the overhype of coolermaster about that.
Techpowerup comes to about the same results from 800 to 1200 watts power usage hovering around 51 to 54dba. Only results that differ a little are lower ambient temperature but again they use a custom anechoic chamber to measure noise that reduces the ambient noises to 20dba which is not normal usage, no one games in an anechoic room and some people are really used to outstanding ambient noise.
Kitguru is the only one with very lower numbers but then again they use THEIR acoustic room, doesn't specify what kind of fan settings they are using and so on.
Three reviews different on their testing methodology and you tell us you have a DOZEN bitfenix fans on the rad plus what other noise around you, no wonder why you think it's quiet, you live in the noise! what's your sound measurement tool? From what I can hear ''I was not sitting "a few feet" away'' your EARS?
Goodbye! Brush up on your reading skills man nice system you have btw.
E.Fyll - Tuesday, November 25, 2014 - linkI will simply comment that do not feel the need to "compare" my results prior to publishing them. And, trust me, I can tell if a unit is "flawed" or not.
In the three reviews you mentioned, only one is actual, complete work and its results coincide with mine. Actually, since the floor noise of Techpowerup's setup is significantly lower, the PSU they tested appears to be even louder.
vred - Friday, November 21, 2014 - linkI have Seasonic SS-1200XP3, and its fan is quite loud when the PSU is fully loaded. I replaced it with Corsair AX1500i, and the fan noise is day and night compared to Seasonic - really quiet. My system easily draws 1100-1300 watts with 4 watercooled Titan Black videocards and really allows those PSUs to show what they are capable of.
Flunk - Friday, November 21, 2014 - link"This makes it virtually unsuitable for users with very advanced gaming systems that try to keep them as quiet as possible"
Who would that be? Anything that needs a 1200watt power supply isn't going to be quiet. Quad SLI systems are loud, even with liquid cooling.
E.Fyll - Friday, November 21, 2014 - linkWell, it can be entirely quiet, but it will also be very, very expensive.
The thing is, sound power and sound pressure are additive figures. This means that if you have a noise source that outputs a total SPL of 50dB(A) and add another device that outputs another 45dB(A) to it, you will have a system with a total SPL of 50+45 dB(A). That's NOT 95dB(A), the scale is logarithmic, so the exact math are X = 10log[(10^5.0)+(10^4.5)] = 51.193 dB(A).
To make things simpler, no, I do not expect that such a powerful system will ever be entirely quiet. You can however build a system that is fairly comfortable for everyday use and gaming without terrible effort. But if you keep adding high noise sources, the total noise output of the system increases and it will sooner or later surpass that "comfort threshold". Ignoring the noise output of a power supply just because the rest of the system "is not quiet anyway" is very logical - a noisy power supply will make the entire system, which already is not quiet, even louder.