Panasonic has developed a new type of IPS liquid crystal panel that has a 1,000,000:1 contrast ratio, as well as a peak brightness of up to 1000 nits. Many LCD displays often advertise such contrast ratios which are measured against a dynamic backlight and are essentially meaningless, but in this case Panasonic is talking about the static contrast ratio of the display, which only reaches as high as 2000:1 on a typical IPS display. Little information is available about the technology at this point, but Panasonic claims that it is achieved by implementing pixel-by-pixel control of backlight intensity and that panels featuring the tech can be produced using contemporary LCD manufacturing facilities.

One of the key advantages that OLED displays have over LCD displays is extremely high contrast ratio that results in superior blacks. The reason why OLEDs can display deeper blacks is simple: such panels do not use backlighting and can completely switch pixels off when they need to display blacks. By contrast, LCDs use backlighting that cannot be turned off on a pixel-by-pixel basis, which is why in many cases blacks look like dark greys.

In the most optimal case, an LCD display will use full-array backlighting, where there are several LEDs placed directly behind the liquid crystal layer. This allows for a degree of control by performing local dimming of certain areas, which is how LCD televisions have managed to meet the standards required for HDR certification. However, the precision of the backlight control is not close to that of an OLED display which works at the pixel level. Even more common, especially in monitors and less expensive televisions, is the use of edge lighting where LEDs are placed along the edges of the display and the light is distributed across the panel using a guiding plate, which means you can really only control the overall brightness across the entire display.

As it appears, Panasonic has found a way to substantially increase contrast ratio of IPS LCDs using a high-brightness backlight and a special layer of light-modulating cells that enable pixel-by-pixel control of backlight intensity. These cells are made of light-tolerant liquid crystal material that has different light-transmission properties compared to those used in the display cells. The layer of light-modulating cells is placed between the backlight and the LCD cells and thus can control light leakage. At a high level, one could think of them like gates placed behind each pixel on the display.

Panasonic does not reveal many details about its light-modulating cells, but since it uses the term “cells”, it clearly indicates that we are dealing with a relatively thick layer of liquid crystals, not a thin layer of quantum dots (you can see an illustration from Nanosys (a company that produces quantum dot films that are currently used on Samsung TVs and displays) to compare “cells” versus “quantum dots”).

Usage of a high-brightness backlight and a layer of light-modulating cells enable Panasonic to build display panels with up to 1000 nits brightness as well as a static contrast ratio of 1,000,000:1. These figures mean that a black level of 0.001 nits should be possible, which is well beyond what even the best full-array backlit LCD displays can offer today.

Panasonic claims that the addition of the layer can be done using the existing equipment for LCD manufacturing, but it's not clear how costly the technology will be to implement or if it requires further components to be added to the LCD stack. The company plans to offer displays featuring the new technology for various professional applications, such as video production, medical, automotive, engineering and so on. Given the positioning, it is obvious that the price of IPS displays with enhanced contrast will be well above that of mainstream monitors.

Panasonic intends to start sample shipments of its new monitors in January, 2017, so the commercialization of the technology will not be too far off.

Related Reading:

Source: Panasonic

Comments Locked


View All Comments

  • MrSpadge - Friday, December 2, 2016 - link

    Yes, yes. And there's probably a market for 5 computers in the world. Glad you don't run IT companies!
  • BrokenCrayons - Friday, December 2, 2016 - link

    I tried to make it very clear that I was aware my thougths were my own opinions on the matter fo screen quality and applied in situations where my own usage was concerned. Short of starting with an all caps disclaimer that's festooned with blinking lights and sirens, I'm not sure how much more obvious I could have been. I guess there's always someone that wants to get upset about how someone else feels regardless of whether or not its relevant to them. Also, I did own an IT company in the late 1990s that was very successful thanks. :)
  • MrSpadge - Friday, December 2, 2016 - link

    Valid points, sorry!
  • bji - Wednesday, December 7, 2016 - link

    But what you failed to mention is why you thought that your very personal preferences were worth broadcasting to the world in this forum. You are not adding any information to the discussion that has relevance beyond your own small world bubble. Why should we care?
  • BrokenCrayons - Friday, December 9, 2016 - link

    Why? I don't know why, but its clear that you do as you bothered to reply. Take a look inward and you'll probably find an answer.
  • KoolAidMan1 - Sunday, December 4, 2016 - link

    You have low standards. Thanks for sharing!
  • Houdani - Thursday, December 1, 2016 - link

    Maybe this explains the fire sale on Dell monitors; clearing space for the new goodness.
  • fanofanand - Thursday, December 1, 2016 - link

    Best case scenario this creates competition in the high-end panel segment and assists in bringing OLED to the masses. One can dream right?
  • hMunster - Thursday, December 1, 2016 - link

    So what all this mumbo-jumbo is saying is that it's basically a black-and-white LCD strapped to a color LCD. There, that's easier to read.
  • Hulk - Thursday, December 1, 2016 - link

    Good way of looking at it. The question I'm wondering...
    What is the light transmission loss for a fully opened LCD cell?
    Cost of this extra hardware?

Log in

Don't have an account? Sign up now