ADATA XPG V1.0 Low Voltage Review: 2x8 GB at DDR3L-1600 9-11-9 1.35 V
by Ian Cutress on December 6, 2013 2:00 PM ESTSingle dGPU Gaming
For our single discrete GPU testing, rather than the 7970s which normally adorn my test beds (and were being used for other testing), I plumped for one of the HD 6950 cards I have. This ASUS DirectCU II card I purchased pre-flashed to 6970 specifications, giving a little more oomph. Typically discrete GPU options are not often cited as growth areas of memory testing, however we will let the results speak for themselves.
Dirt 3:
Bioshock Infinite:
Tomb Raider:
Sleeping Dogs:
35 Comments
View All Comments
MrSpadge - Sunday, December 8, 2013 - link
> Does low voltage ram avoid this?Nope. It's actually the signal quality and not the power draw which causes them to downclock. I've got a X79 build with 8x8 GB where I simply set XMP at stock frequency (1600 or 1866) and it works without problems. I think it's the same as overclocking memory and controller: Intel doesn't want to validate this, but this doesn't mean it would not work.
BlueReason - Saturday, December 7, 2013 - link
Do you ever look at all the charts full of near-identical sized bars and ask yourself just how worthwhile these RAM reviews are?ShieTar - Tuesday, December 10, 2013 - link
Well, some RAM testing is fundamentally important, in order to understand how much impact there is with current CPUs, RAM, Software, etc.What may be less useful is posting a full article that shows just how little impact there is right now, and then following it up with a steady stream of single RAM tests that only keep on reporting the same conclusion over and over.
cjs150 - Monday, December 9, 2013 - link
I use low profile/low voltage samsung green for my HTPC (which is fanless). Lower voltage = less heat which is obviously beneficial in a fanless computer. The fact that the samsungs were the same price as a good name standard ram meant the decision was very simple.If not going fanless then I would still go for the samsungs where memory height was an issue for a big CPU cooler.
Low voltage is a niche
blackie333 - Tuesday, December 10, 2013 - link
A have a brand new Haswell build with 4670K, Asus Z87-Pro and G.Skill 2400C10 memory. I was quite surprised that in idle mode G.Skill@2400Mhz is consuming much more energy(10Watts) than CPU cores (1-5 watts).Is there any bios setting (except setting DRAM frequency manually too low) to make memory be more effective in idle state(s)? Thank you in advance for advice