The Corsair Hydro X Custom Water Cooling Review, on a Ryzen 9 3950Xby Gavin Bonshor on February 5, 2020 9:00 AM EST
CPU Performance, Short Form
For our motherboard reviews, we use our short form testing method. These tests usually focus on if a motherboard is using MultiCore Turbo (the feature used to have maximum turbo on at all times, giving a frequency advantage), or if there are slight gains to be had from tweaking the firmware. We put the memory settings at the CPU manufacturers suggested frequency, making it very easy to see which motherboards have MCT enabled by default.
Rendering - Blender 2.7b: 3D Creation Suite - link
A high profile rendering tool, Blender is open-source allowing for massive amounts of configurability, and is used by a number of high-profile animation studios worldwide. The organization recently released a Blender benchmark package, a couple of weeks after we had narrowed our Blender test for our new suite, however their test can take over an hour. For our results, we run one of the sub-tests in that suite through the command line - a standard ‘bmw27’ scene in CPU only mode, and measure the time to complete the render.
Rendering – POV-Ray 3.7.1: Ray Tracing - link
The Persistence of Vision Ray Tracer, or POV-Ray, is a freeware package for as the name suggests, ray tracing. It is a pure renderer, rather than modeling software, but the latest beta version contains a handy benchmark for stressing all processing threads on a platform. We have been using this test in motherboard reviews to test memory stability at various CPU speeds to good effect – if it passes the test, the IMC in the CPU is stable for a given CPU speed. As a CPU test, it runs for approximately 1-2 minutes on high-end platforms.
Compression – WinRAR 5.60b3: link
Our WinRAR test from 2013 is updated to the latest version of WinRAR at the start of 2014. We compress a set of 2867 files across 320 folders totaling 1.52 GB in size – 95% of these files are small typical website files, and the rest (90% of the size) are small 30-second 720p videos.
Synthetic – 7-Zip v1805: link
Out of our compression/decompression tool tests, 7-zip is the most requested and comes with a built-in benchmark. For our test suite, we’ve pulled the latest version of the software and we run the benchmark from the command line, reporting the compression, decompression, and a combined score.
It is noted in this benchmark that the latest multi-die processors have very bi-modal performance between compression and decompression, performing well in one and badly in the other. There are also discussions around how the Windows Scheduler is implementing every thread. As we get more results, it will be interesting to see how this plays out.
Neuron Simulation - DigiCortex v1.20: link
The newest benchmark in our suite is DigiCortex, a simulation of biologically plausible neural network circuits, and simulates activity of neurons and synapses. DigiCortex relies heavily on a mix of DRAM speed and computational throughput, indicating that systems which apply memory profiles properly should benefit and those that play fast and loose with overclocking settings might get some extra speed up. Results are taken during the steady-state period in a 32k neuron simulation and represented as a function of the ability to simulate in real time (1.000x equals real-time).
Post Your CommentPlease log in or sign up to comment.
View All Comments
Ninhalem - Wednesday, February 5, 2020 - linkI am a custom water cooling builder and know how expensive the obsession can get, but I had to price check those fans. That's ridiculous to pay 130 USD for just 3 fans. You would be better off getting some nice static pressure fans like the EK Vardars and then slapping some Phantek's light rings on top of them than paying a little over 40 USD per fan.
YB1064 - Wednesday, February 5, 2020 - linkThe cost is pretty high, but it looks and seems to perform well. Apart from the outrageously priced fans, perhaps one can find a cheaper pump+reservoir on EK's own website?
Hxx - Friday, February 7, 2020 - linkI’ve been building custom loops for years. Definitely check AliExpress / bykski/barrowch or if u don’t wanna wait then primochill ships from Utah . Fantastic high quality componentry without the premium bull from bitspower Corsair ek and the like
hanselltc - Monday, February 17, 2020 - linkKeep in mind you need aluminium parts though just to be cautious
LedHed - Wednesday, February 5, 2020 - linkEspecially when you consider that you can buy Noctua NF-A14 iPPC 2000/3000 PWM fans for under $30 each!
Personally, I'm going to go with industrial rated fans with a 6 year warranty (with a static of 4.18 mm H2O for the 2000 RPM), over some Corsair ones with RGB with static pressure below 2.0 mm H2O (for the 140mm model).
Samus - Wednesday, February 5, 2020 - linkI was just about to chime in this sentiment. I have 4 NF-A14’s in my silverstone FT03 and I’m pretty sure they were all under $100 shipped when I upgraded the fans from the crap Silverstone included. The A14 iPPC’s also ram massive amounts of air through radiators, negating the need for a push + pull configuration.
Somehow I can’t believe the corsairs could do better unless they are a copy.
jeremyshaw - Thursday, February 6, 2020 - linkWait, I have a FT03, too, it will barely fit three 120mm fans o.0
All Noctuas, of course. The stock Silverstone fans on basically every case I have ever purchased from them were noisy and didn't move much air.
Maybe it was the FT02 or FT05 (5 - 2 = 3 :P)?
FatBoyDiesel - Wednesday, February 5, 2020 - linkEK-Furious Vardar has 5.81mm H20 static pressure with a 500-3000RPM range. It's selling for $25 USD on EKWB's website and $21.99 at MicroCenter. Bought two of them and had no regrets.
supdawgwtfd - Thursday, February 6, 2020 - linkBut... RGB!
Azune - Friday, February 7, 2020 - linkI bought one of those Noctua industrials fans some time ago as well. And while its true that they are very durable, they have one problem that makes them completely unusable for me.
They have to spin at around 1000 RPM to even start. Which makes them very audible even when your PC is idle. I since have switched to their new NF-A12x25, which have a minimum RPM of 450, which makes them completely inaudible when idle.