It’s my last CES post (finally, I know), but I saved one of the more innovative ideas for the end. Coming courtesy of Razer, Project Christine ran away from CES with numerous awards and accolades. There were other items on display at Razer as well – like the “Nabu” wearable fitness band/smartwatch – but most of the products have already been launched so I won’t dwell on them. And as for Nabu, the idea isn’t bad but the early models shown at CES felt a bit too bulky/uncomfortable to me. The big news in my book was the modular PC, so let’s take a closer look at what Razer has created.

First, it’s important to note that the two Christine prototypes shown at CES are apparently not functional (or at least, no longer functional after shipping?), which is unfortunate as we would have loved to see a more real-world demonstration. Anyway, the idea is that you have this modular case (tower/column) where you can plug in GPUs, HDDs/SSDs, and other devices that come in self-contained modules. Need a faster GPU? No longer do you open up your PC and unscrew the old GPU and then install the new GPU; instead, you simply pop out the old module and add a new one – or in the case of CrossFire and SLI systems, you could simply plug in a second (or third?) GPU. Or perhaps you need more storage; simply pop in another SSD module and away you go.

Take one look at the Christine prototype and you might start to wonder about cooling. Instead of air-cooling or even liquid-cooling, Razer is apparently using a non-conductive mineral oil that circulates through all of the modules (or at least the modules that need cooling I suppose), with as I understand it the parts being completely submerged in the oil. Presumably along with the GPUs, Power Supply, Storage, and other devices, one of the modules will likely need to be a pump + radiator. Again, it would have been great to see the PC actually running, but perhaps it’s not at that stage yet – though Razer indicated that there’s at least one working prototype that’s currently being used by their CEO.

So far so good, but rerouting PCI Express lanes to custom ports isn’t really all that difficult (relatively speaking). Where things start to break down is when we get into the idea of adding more…let’s say “unusual”…parts. Swapping GPUs is easy enough, as we already do that with our “modular” desktop PCs. The same applies to storage devices as well as things that might plug into USB ports. But what happens if you want to upgrade your CPU or chipset? And what sort of RAM is supported and where is it located? RAM is usually in close proximity to the CPU, and one of the modules houses the CPU + RAM, so that solves that question (though it might make upgrading RAM a little difficult). But the location of the chipset wasn't disclosed (maybe it's in with the CPU and RAM?), and I suspect in the prototype upgrading the chipset/platform simply isn’t possible.

What would be really ground breaking would be a modular PC where you could easily swap any and all components. Maybe that’s something Razer is hoping to deliver in the future, but imagine having the center column contain a large PCI-E backplane that could be upgraded with various options. The default model might come with 24 or 32 PCI-E lanes, while higher end backplanes could boast 48, 72, or even 96 (or more!) lanes. Perhaps the chipset would need to be part of the backplane, or maybe not – certainly it would have to be something more than a stock chipset if it were going to support differing numbers of PCI-E lanes – or at the very least, it would have to have something like a PLX switch, which wouldn't actually doing anything for peak bandwidth. We could even have a design that could be upgraded to PCI-E 4.0 support in the future, and maybe something with the ability to transition between CPU platforms – so AMD, Intel, ARM, etc. That would take a lot of work and probably wouldn’t really receive much in the way of support from Intel, but it’s a nice dream.

Ultimately, it’s an idea we’d love to see flourish, but we’ll have to wait and see where Razer goes with it. We could draw a parallel with the automotive industry and their concept cars, where all sorts of cool/crazy ideas are shown but few of them ever reach the point of mass production. Right now, we have plenty of questions and Razer isn’t really providing much in the way of answers. How much would the modular PC cost – for the initial base unit as well as for the component upgrades? When will it be available (if ever)? What’s the cooling capacity? How much (if any) noise does it make? How reliable would such a device be long-term? What about durability for frequent upgraders (or if someone happens to accidentally knock it over – I mention this as someone with a few children running around the house; I like my big, sturdy box, thank you very much!)?

Even if the device may not be entirely practical, Razer has built a brand around somewhat niche products. Their peripherals have catered primarily to gamers since they first showed up, and the Razer Blade laptops are generally high quality designs if a bit expensive. The Project Christine prototypes felt pretty solid and it’s certainly an eye-catching design, though perhaps a bit too much so. If Razer brings in other partners or perhaps licenses the core elements, we might even end up with more traditional looking modular PCs that still provide an easier path to upgrades than our current devices. Now if we can just get something similar for laptops, I’ll be happy.

Comments Locked


View All Comments

  • JarredWalton - Thursday, January 23, 2014 - link

    Razer's CEO isn't quite your run-of-the-mill CEO. Plus, if he has a working prototype, I'd assume more than just that one exists. I gathered from some of the comments that Project Christine (and Nabu) are something he came up with and tasked his employees with creating, rather than something the engineering folks dreamed up on their own.
  • dac7nco - Thursday, January 23, 2014 - link

    This is impossible, and would be in anything else but VME/SBUSS, where the CPU was an add-in card. This system would have to have to have a proprietary connector, in each "cell", which fed PCIe-16 3.0, SATA-III and up to 300 watts.

    Oh, and mesh, seamlessly with the factory water/(OIL!) cooler when Mr. NumbSkull picks up a GTX-760 module at WalMart. God help us from this.

  • Dustin Sklavos - Thursday, January 23, 2014 - link

    This thing is a logistical horror show, and every time I hear about it I actually get a little more irritated.

    Best of CES boondoggle. Really, the prototype is being used by the CEO, that's why they couldn't demonstrate a working one on the show floor? They could only make one prototype? Of a device that requires so much extra work and expense to be modular that it defeats the purpose?
  • JarredWalton - Thursday, January 23, 2014 - link

    "at least one working prototype" doesn't mean it's the only one. Supposedly at least one of the systems at CES was working prior to being shipped to the show. Yeah, I know -- I believe that story about as much as anything else. Anyway, I (and you, hahaha) know someone that works over at Razer, and this is a real thing. How many exist? He can't say. How well do they work? He can't say. But it's not just a fake prop on a pedestal.

    I'll withhold any final judgement until (if) the design ships. I still feel the whole thing is more like an automotive concept car that's unlikely to ever be produced in reasonable quantities, and honestly while it's eye-catching I can't see this as being somehow aesthetically superior to all the other cases out there. Anyone with kids or pets is probably thinking the same thing: "That tower of modules is a disaster waiting to happen!"
  • mobutu - Thursday, January 23, 2014 - link

    This is a superb idea and I really really hope it gets to see the light soon.
    Fantastic thinking and thumbs up for the folks over there at Razer.
  • piroroadkill - Thursday, January 23, 2014 - link

    A "modular PC"? You mean like every normal desktop?
  • Rocket321 - Thursday, January 23, 2014 - link

    ...except the Mac Pro! lol
  • eanazag - Thursday, January 23, 2014 - link

    What wasn't mentioned here is that OCing would be automatic and warranty supported. Knowing that there is oil cooling would really appeal to boutique buyers. There is more info on Razer's site.
  • Notmyusualid - Thursday, January 23, 2014 - link

    It looks amazing.
  • HisDivineOrder - Thursday, January 23, 2014 - link

    I always suspected something like this would come eventually. The thing is, I don't think so anymore. The reason is because of cost. This will cost a pretty penny. Much like anything Razer, actually.

    I also happen to think the limitations of chipset/memory and other devices along with the fact only THEY will make the modules is going to seriously limit this concept.

    If AMD were pushing this concept, I could actually believe it more. AMD makes or sells CPU's, GPU's, motherboard chipsets, memory, and it wouldn't be hard to imagine them selling SSD's. They could push this concept in a way that no one else could simply because of their reach.

    If Intel, nVidia, and AMD all showed up saying, "This is the future of desktop PC's," and used this as a way to introduce ease of use with higher end performance than your traditional laptop/tablet/smartphone SOC, then I'd say, "Yeah, this is going to be revolutionary."

    But I see this as the desktop equivalent of the Razer netbook that never came to market.

Log in

Don't have an account? Sign up now